Hydro-Lek Tooling

For additional information on any of these products, contact us.

HLK-33800 Compact Cutter

The HLK-33800 Compact Cutter is a double-acting device capa-ble of cutting steel wire rope up to 1 inch (25mm) diameter and steel bar up to1/2 inch diameter. The cutter has a shaped closure for the cable such that it will cut the full diameter in one pass. The unit comes with an inten-sifier that allows operation from a 140 bar supply. Weight in water is approximately 8.2 kg. Various mounting options are available.

HLK-33800 Data Sheet

HLK-33900 Standard Cutter

The HLK-33900 Standard Cutter is a double-acting device capa-ble of cutting steel wire rope up to 1.5 inch (38mm) diameter and steel bar up to 1 Inch diameter. The cutter has a shaped closure for the cable such that it will cut the full diameter in one pass. The unit comes with an intensifier that allows operation from a 140 bar supply. Weight in water is approximately 14.3 kg. Various mounting options are available.

HLK-33900 Data Sheet

HLK-33600 4" Cutter

The Hydro-Lek 4" Cutter can be operated directly from a work class hydraulic supply or from a system comprising of the HLK-90200 and 9200 Power Packs or HLK-90100 Dual Power Pack, HLK-7020 Valve Pack, or HLK-72100 and control system. The cutter jaws grab the hose or cable to be cut and then a rotating disc is fed onto the job to be cut. The grip is so strong that even in zero visibility and locked on, a perfect cut can be easily achieved. Weighs 12 kg
in water.

HLK-33600 Data Sheet

HLK-33625 6" Cutter

The HLK 33625 6" Cutter is a self-contained grab, feed, and cut unit. Weighing only 14 kg,
it can cut pipe, cable, or grout hose. This is a significant weight reduction on standard anvil cutters. It can be controlled using standard Hydro-Lek systems or directly from a work- class ROV.

HLK-33625 Data Sheet

HLK-3200 Sub-Sea Drill

The HLK-3200 Sub-Sea Drill was designed for drilling holes so that sacrificial anodes could be fitted under water. It uses a heavy-duty magnet to hold the drilling system in place while a hydraulic motor rotates the drill. A HLK-1080 Cylinder with a flow control valve pushes the drill carriage down the guide rods to drill the hole.

HLK-3200 Data Sheet

HLK-32000 Submarine Rescue Drilling Machine

This device was developed in the aftermath of the KURSK disaster to enable emergency air to be applied through the hull of a stricken submarine.

HLK-32000 Data Sheet

HLK-31000 Water Jet

The HLK-31000 Water Jet has been developed to assist in cleaning tasks needed on many sub-sea structures before intervention. Driven by a three- phase motor, the pump can deliver 18 liters per minute at 120 bar though an orbital nozzle. The nozzle can be deployed by a manipulator or fixed on the ROV and directed by the ROV itself.

HLK-31000 Data Sheet

HLK-3150 Suction Pump

The HLK-3150 Suction Pump
is a compact Venturri device designed to provide controlled flows for suction anchor install-ation and removal. Together with the HLK-31000 Water Jet, it can be fitted to the smaller ROVs, either within the frame or skid mounted. This enables suction tasks as well as jetting in one package.

HLK-3150 Data Sheet